page . 1 october 20,2014-rev.01 MBR5H200SS / sr5h20 series features ? plastic package has underwriters laboratory flammability classification 94v-o. flame retardant epoxy molding compound. ? low power loss, high efficiency. ? high current capability ? high junction temperature capability ? lead free in compliance with eu rohs 2011/65/eu directive ? green molding compound as per iec61249 std. . (halogen free) (smb) ultra low ir schottky barrier rectifiers voltage current 200~250 v olt 5 ampere mechanical data ? case: do-201ad, smb package ? terminals: solder plated, solderable per mil-std-750, method 2026 ? do-201ad weight: 0.04 ounces, 1.142 grams. ? smb we ight: 0.003 ounces, 0.092 grams. maximum ratings and electrical characteristics ratings at 25c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% 200v 250v do-201ad MBR5H200SS mbr5h250ss smb sr5h20 sr5h25 notes : 1.mounted on a fr4 pcb, single-sided copper, with 100cm 2 copper pad area 2.the testing condition of the thermal resistance (junction to lead) is based on 10 mm lead length between two 1 0cm x 10cm copper pad parameter symbol 200v 250v units maximum recurrent peak reverse voltage v rrm 200 250 v maximum rms voltage v rms 140 175 v maximum dc blocking voltage v dc 200 250 v maximum average forward current i f(av) 5a peak forward surge current 8.3 m s single ha lf s ine-wave superimposed on rated load i fsm 150 a maximum forward voltage at 5a v f 0.9 v maximum dc reverse current at rated dc blocking voltage t j =25 o c t j =125 o c i r 0.5 1 a ma typical thermal resistance smb(notes 1) do-201ad(notes 2) r jc 18 17 o c / w operating junction and storage temperature range t j ,t stg -55 to + 175 o c do-201ad smb
page . 2 october 6,2014-rev.00 MBR5H200SS / sr5h20 series 0 1 2 3 4 5 6 0 25 50 75 100 125 150 175 t c , case temperature (c) i f , forward current (a) 0.001 0.01 0.1 1 10 100 1000 10 20 30 40 50 60 70 80 90 100 i r , reverse current ( a) t j = 25 c t j = 75 c t j = 125 c t j = 150 c t j = 175 c fig.3 typical reverse characteristics fig.4 typical forward characteristics fig.1 forward current derating curve fig.2 typical junction capacitance 1 10 100 1000 11 01 0 0 c j , junction capacitance (pf) v r , reverse bias voltage (v) 0.01 0.1 1 10 0 0.2 0.4 0.6 0.8 1 i f , forward current (a) v f , forward voltage (v) t j = 150 c t j = 125 c t j = 25 c t j = 75 c t j = 175 c percent of rated peak reverse voltage (%)
page . 3 october 6,2014-rev.00 MBR5H200SS / sr5h20 series 1.0(25.4)min. 0.052(1.3) 0.048(1.2) 0.375(9.5) 0.285(7.2) 1.0(25.4)min. 0.210(5.3) 0.188(4.8) 0.083(2.11) 0.075(1.91) 0.185(4.70) 0.160(4.06) 0.096(2.44) 0.083(2.13) 0.050(1.27) 0.030(0.76) 0.220(5.59) 0.200(5.08) 0.012(0.305) 0.006(0.152) 0.155(3.94) 0.130(3.30)
page . 4 october 6,2014-rev.00 MBR5H200SS / sr5h20 series part no_packing code_version MBR5H200SS_ay_00001 MBR5H200SS_ay_10001 MBR5H200SS_b0_00001 MBR5H200SS_b0_10001 MBR5H200SS_r2_00001 MBR5H200SS_r2_10001 sr5h20_r1_00001 sr5h20_r2_00001 for example : rb500v-40 _ r2 _ 00001 part no. serial number version code means hf packing size code means 13" packing type means t/r packing code xx version code xxxxx packing type 1 st code packing size code 2 nd code hf or rohs 1 st code 2 nd ~5 th code tape and ammunition box (t/b) a n/a 0 hf 0 serial n umber tape and reel (t /r) r 7" 1 rohs 1 serial n umber bulk packing (b/p) b 13" 2 tube packing (t/p) t 26mm x tape and reel (right oriented) (trr) s 52mm y tape and reel (left oriented) (trl) l panasert t/b cathode up (pbcu) u forming f panasert t/b cathode down (pbcd) d
page . 5 october 6,2014-rev.00 MBR5H200SS / sr5h20 series disclaimer ? reproducing and modifying information of the document is prohibited without permission from panjit international inc.. ? panjit international inc. reserves the rights to make changes of the content herein the document anytime without notification. please refer to our website for the latest document. panjit international inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ? panjit international inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ? applications shown on the herein document are examples of standard use and operation. customers are responsible in comprehending the suitable use in particular applications. panjit international inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ? the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify panjit international inc. for any damages resulting from such improper use or sale. ? ? since panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.
|
